Question Locked

A puzzling matter

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hello everyone. I have the following situation and would really appreciate any help you can provide. My daughther downloaded a programme which erased the windows and command directories of her computer rendering the CD and LAN access useless. To make matters worst, she doesn't have a floppy drive on the computer. Booting from the CD is also not possible. Here's the configuration: PII 350 Mhz, 196Kb RAM, Win98SE. Thanks.

10 replies

by thechas

Have you tried entering BIOS setup and making sure that the boot settings list using the CD drive as an option?

Keep in mind, that this computer is very apt to be infected by a virus.

If you can change the BIOS settings, you might want to use the "Ultimate Boot CD" to check things over and clean things up before installing Windows again.

http://www.ubcd4win.com/

Chas

by a.knight

Chas, thanks for the input, but although I have BIOS access, and did change the booting sequence, the computer reads the CD and reverts to the HD without completing the boot sequence.

by thechas

Are you sure that the CD you have is a bootable CD? I'm not sure that all versions of W98 are bootable.

It is also possible that the virus is able to prevent you from booting from other devices. Or, has also infected the BIOS.

Here is what I would do if the hardware was in my possession.

This presumes that:
a) there are no files to recover from the drive.
b) since the drive is infected, it is too risky to attempt file recovery.

Install the drive in another system with a working floppy drive.

Boot up with a write protected W98 startup floppy.

Run fdisk /mbr
Run fdisk again, and delete all logical drives and partitions.

Exit fdisk and reboot.

Run fdisk to partition the drive as needed.

Exit and reboot.

Boot up again and format the drive with the /s option so that the drive is made bootable.

Insert the W98 CD and copy it over onto the drive. Use a folder such as Win98. Also, copy device drivers to the drive.

Shut down and move the drive back to it's home computer.

Startup switch to the folder where you copied the CD to.

Run setup.

"IF" there are files that you want / need to save, there is a risk to whatever system you place this drive into.

Make sure that your virus definition files are up to date.

Install the drive as a slave on the secondary IDE controller.

Boot up and run a full virus scan on the drive.

Once the drive is clean, remove all files (including hidden and system files) in the root folder of the drive.

System the drive. (Run the Windows 98 command to copy the system files to the drive and make it bootable.)

Copy the W98 CD and any device drivers to the drive.

Shut down and move the drive back.

Boot up and run setup from the folder with the Win98 CD files.

Third option, install the drive in a USB external drive case and scan and clean as above.

Chas

by smallbiz-techwiz

This is a Pentium II with how much RAM? Not many diagnostic tools will even run on this dinosaur. Seems to me like it would be more practical to lay this one to rest and buy another computer.

by a.knight

I don't think it would be wise to give my 12 year old something any more sophisticated. This dinosaur, as you say, has thaught her the basics of computing and internet, so its quite part of the family. Anyway, thanks for the assist.

by a.knight

I was able to install a floppy on the computer and boot from there. I formated the HD as you suggested and was able to re-install win98. Your info on the win98 CD not being bootable was invaluable. I had no idea of that. All I have to do now is to try and update the OS, which has prooved to be much more complicated than I antecipated as MS has removed win98 update site. Pls let me know if you have any suggestions for this one. Thanks again.
Knight

by thechas

You can still manually download updates for W98 using the Windows Update Catalog page:

http://v4.windowsupdate.microsoft.com/catalog/en/

For your older system, you will want to skip some of the updates.

I recommend using IE 5.5 and do not update DirectX beyond the version supported by your video card driver.

I would also stop at Media Player 8.

You can download older versions of nearly any browser from the Browser Archive section at www.evolt.org.

I recommend installing the updates in release date order. That way, you don't end up replacing new files with old.

If you have any problems getting the updates, I believe I have all of the W98 updates downloaded. They will fit on a single CD. I can send you a copy for the cost of making the CD and shipping.

Send me your address via peer mail if you need the CD.

When you are ready, please rate the answers that helped you as helpful.

Chas

by aaron.irby

Not sure if your questions been answered but since she wiped windows off your machine I would recommend two options.
The first option being to keep window off that machine. The system is far to old and lacks the resources to maintain any new versions of windows (Win2k through Vista) and Windows 98 is no longer supported by Microsoft so even if you re-install it you will not be able to download all the software patches for this Operating System to ensure that most of the vulnerabilities in the O.S. are no longer an issue. I would search the net from a diferent computer and find a free copy of Linux. There is a million different versions you can find that will suite your needs and the vast majority of Linux products are open source. (This means that not only can you change the source code your self if you want your operating system to do something diferent but it also means that it isn't copy writed and it is free.)
Also, Linux (and UNIX) are the most secure operating systems available. There is only one known virus for Linux and it is just about useless. The only reason I use windows is becuase I am a video game fanatic and I don't have the time to screw with video games trying to get them to work on Linux machines. (I do have a dual BOOT set-up so I can choose if I want to load Windows or Linux PC OS2. If you have no experience with Linux then PC LinuxOS2 is the version I recomend. It is just as easy to use as windows but requires far less resources than Windows does and it is absolutely free.(You can pay for profesional Linux Distributions like Red Hat, Fadoracore or Sues but why bother. PC Linux OS has just about all the features they do and it is extremely easy to get Linux programs installed (Mounted)with no need to reboot or any other stuff you have to do with windows.
If you want to stick with windows then you are going to have to use Windows 98 or older. The machine your describing doesn't have the system resources neccessary for any later versions. Unfortunately as I said before you will no longer be able to updte the OS unless you find a web site out there that happens to have the neccessary patches for that OS. (You also have to ask if you trust files from that web site if you even do find it.)
One last option is to see if anyone still carries the type of RAM you use in that machine. Windows 2000 (Win2k) and I believe Windows XP can still use a PII processor but you will need a lot more RAM.
The basic requirementsfor WIN2k is 256 MB of RAM. That is just to run the operating system. You will actualy need about 512MB if you plan on just using the machine for Web surfing and data processing. (Modern Video games and graphic applications would be out of the question.)
Now back to your main question. How to get Win98 back on your machine. You will need to be abe to see a boot menu so I hope your machine doesn't skip displaying all of the BOOT process and jump right into the OS.
On an older machine like yours you will need to go into the BIOS. On most modern Pentium mother boards you just type F2 when you first turn on the machine but every motherboard manufacturer has their own BIOS and their own way to access it. Once you find out how to get into the BIOS go to an option labled "BOOT Menu". Inside you will see that your hard drive is selected to be the main boot device. (More than likely anywy.) You need to select your CDROM to be the first order or the primary boot device. Once you do that you will need to ensure the Win98 CD is in the CDROM drive and select exit and save changes. From there the machine will automatically re-boot it's self. If your machine functions properly then it should automatically check the CDROM for boot files. From there you shoud be able to install the operating system as long as you have disk subsystems that the Win98 O.S. recognizes. If you don't then you will have to buy a floppy drive becuase Windows will not look for an additional CDROM/DVDROM for third party drivers. You have to have a floppy disk with the drivers for your Hard drive controller type on it before Win98 will know how to recognize your hard drive. (To install third party drivers Win will prompt you at the begining of the instalation to hit F6 if you need to install them.)
After you completed instalation you may need to go back into your BIOS and change the boot device back to the Hard drive. (Some BIOS have a boot order which lets the computer look at diferent devices to boot from. If you have a boot order instead of only one BOOT device option then you will not have to worry about this as long as you don't keep the WIN98 CD in your CD tray after instalation is complete.)
I hope this long drawn out answer helped you out.

IrbyAC
Electronic Data Systems
Navy Marine Corps Intranet.
Marine Corps Bases Japan / Camp Fuji

by sue t

I can't vouch for this site but when I did a search for 98se updates I found this site http://exuberant.ms11.net/98sesp.html This may give you what you need. I saw that it doesn't have the newer versions of internet explorer but I know you can find those several places on the web. Some people will always push upgrading but I always tell people that if it does what you want and you are happy then don't worry about upgrading until you find a compelling reason to do so. Technology changes so fast. but if for any reason you have a problem with 98 you can download, install and use various free versions of linux and they have versions that work just great on the hardware you have. As with anything there will be a learning period. have a great day.

This discussion is closed to new replies.