Discussion Locked

About RAS

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Please could you advise me how to browse an NT network after having successfully connected to the RAS Server ???

It is assumed that I have already configured the connection to RAS and successfully established the connection .

Then what ??? I could not browse the RAS server . How could I access my foldres and files ? What could be wrong ??

Please let me have your answer as soon as possible .
Thank you in advance

9 replies

by joachim.lorenz

First configure your system to be in the same GROUP as the domain of the RAS-Server. That means in win 9x/NT configure in the network-properties/identification the same GROUP-name as the domain-name (do not connect to the domain !). Remeber to activate DNS in your system (type in a DNS-name for your system). Then login locally in to your system with the same name and password you use in the domain. Give some minutes to synchronize the browsing-mechanism - and there you are !
Greetings
Joachim

by nettek

1. If you are using Win9x as the client, make sure the local Windows username and password (the *.pwl list in your system.ini file) match the username and password of your NT domain.
2. Make sure your workgroup name = your domain name.
3. If a Win95 client, make sure you have the latest Win95 DUN client installed. You can find this at http://www.microsoft.com/downloads/release.asp?ReleaseID=126 46 (there should be no spaces in this link)
4. If you are using DHCP to provide the clients with the WINs server and gateway IP addresses, it is often unreliable. Try manually inputting the WINs and gateway IP addresses in the TCP/IP properties of the DUN settings of the clients. You definitely need to do this if you are using static addresseson the clients.
5. For Windows 95 and Windows 95 OSR1 download and install rasupd.exe. For Windows 95 OSR2, install ras2upd.exe. You will find the download link at the MS Knowledge Base under article Q154434 (It solves other problems in addition to "No domain controller available...") You must have DUN1.3 installed first.
6. If your laptops are connected to your LAN via a nic at sometime, allow sufficient time for the master browser to drop your laptops from the browse list before connecting thru the VPN.

If those to tips don't solve the problem...

7. Add LMHOSTS files to the clients. You definitely need this if you are not running WINs.

As a last resort (it will add to your network overhead)...

8. Install NetBEUI as a protocol on your network. It usually eliminates all RAS browsing problems.

by mel

after you are connected via ras, go to Start>Run, then type in the box "\\domainname". Leave off the parenthesis of course. Then hit enter or click ok. This will show you all the shares on the domain. That's double-back-slash then the domain name, like \\domainname. Hope this helps. melt

This discussion is closed to new replies.