Access 97 report printing

The only logical answers if your margins are correct and nothing prints on page 2 is:
1. You have an invisible "New Page" inserted at the end of your report OR

2. There are a few "blank" spaces scabbed behind your last character.

To fix either open the last thing that appears in your report in report view and make sure it doesn't have any 'blank' spaces or a new line character (by pressing the down arrow and/or left arrow keys until they stop moving). Backspace until you are at the end (the second page should close while you are pressing backspace.

You may need to check the PrintEvents[...] button to see if you have 'extra'information attached to the CommandButton.
Or you can re-do the button following AccessHelp :Create a command button that prints or mails a report

1 Open a form in Design view.
2 Click the Control Wizards tool in the toolbox if it's not already pressed in.
3 In the toolbox, click the Command Button tool .
4 On the form, click where you want to place the command button.
5 In the first wizard dialog box, clickReport Operations in the Categories box, and then click the type of button you want to create in the Actions box.

6 Follow the directions in the wizard dialog boxes. In the last dialog box, click Finish to display the command button in Design view.

If you want to see the event procedure that makes the button work, click the Build button in the OnClick property for the command button.

This should 'fix you up'.
Hope this helps ...H