Access two Networks from one Workstation
How do I set up a Windows NT workstation
to access two networks?
Windows Forum
How do I set up a Windows NT workstation
to access two networks?
by ð
not too clear on what u mean by 2 networks. If talking about able to logon to different domains on the same workstation, the only thing you'll need to do is join the workstation to a domain and setup a trust between the 2 networks.
hope this helps.
by elgoldyn
additional to the first answer; take care that the username and password on both domains is the same (the transition between the domain will be seamless then).
If you mean to access to different workgroups with different subnet mask; in the advanced configuration of tcp/ip you can enter multiple ip (with their subnet) on the same networkcard.
regards,
leopold
by elgoldyn
by larry23
If you want to access two networks? I?ll assume that you mean two different domains.
The first thing you need to be sure of is that there are no duplicate ip addresses or netbios names between networks.
You don't need to have a trust set up and they don?t need to be on the same subnet (providing you have a router/switch between the two)
You do need to have a user account on both domains and, as stated in answer number two, if they are identical in both domains the transition is quite seamless. If the user name or password is different in either domain, then when accessing a resource in the opposite domain you will be prompted to type in the correct user name and/or password to access the resource. Providing you have the required permissions, access should be granted accordingly.
In my situation, we have two domains, no trust between them, on separate subnets, that share a common dhcp, wins, dns and ethernet architecture. This eliminates duplicate ip's, etc. Having the same username/password makes it seem as though they are one network/domain.
by elgoldyn
by nugget
by elgoldyn
by elgoldyn
This discussion is closed to new replies.
Sort by Trending