5 replies
by softcorp.us
Hello...
When you have a wired network and a wireless network, you really have two networks. You have to do something to have them talk to each other. It's not difficult, but it's not automatic.
Connecting the two networks can be done by various means with names like bridge, router, and switch. For example, I have a small office network with a Linksys WRT54G broadband router. This single box provides an ethernet connection to the Internet (cable modem in my case), wired ethernet, and a wireless 802.11b/g network. This box is easily configured to route traffic between the wired and wireless networks. It also provides Internet connectivity to both networks and does other things as well (DNS, DHCP, etc.).
Please answer some questions:
1. What are the makes and models of your network hardware components? It sounds like you have some kind of broadband service (cable or DSL), a broadband router, and a WAP (wireless access point).
2. How are your network components connected?
Note: Since you're new to TR, be sure to rate the answers you receive and close your question when you're done.
-----Steve Jackson
CEO/CSA
Software Corporation (Softcorp)
http://www.softcorp.us/probono
Advanced pro bono tools and utilities free for personal use
Poster rated this answer.
by mendenhallre
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending