11 replies
by jcurl
Personally I haven't been lucky enough to be able to try this yet, but I think you should install the new server as BDC. Then shutdown the PDC. Promote the BDC to PDC, restart the old PDC and demote it to BDC. Promoting and Demoting is done usingServer Manager. See KB for more info.
Good luck,
Jeremy P, MCSE
by jcurl
by jcurl
by bleonard
by rgrowcock
by bleonard
by spydergst1
by bleonard
by mjrebholz
Install NT on the new machine, and choose to make it a BDC in your existing domain. Reboot the server after setup is complete, and make sure the other machines can "see it" by checking in Server Manager for Domains when it comes back.
Again, fromwithin server manager for domains (from any BDC or the PDC itself when logged in as Administrator), highlight the new server you have built, and choose to "PROMOTE TO PDC" from the menu. The old PDC will be demoted to a BDC automatically, and the "rightable" copy of the SAM is then transferred to the new PDC.
I would then restart the old BDC, synchronise the entire domain, and then check that your clients can be authenticated OK, and that you can add a new dummy user a/c to the network. Check Event viewer for messages.
Don't forget that little is instantaneous in NT. It may take 5mins or so for the change to take effect - especially if you have a large SAM, but choosing to "Synchronise the Domain" whilst higlighting the PDC in ServerManager always forces all BDCs to check-in.
Regards
by bleonard
by bleonard
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending