Discussion Locked

Add Second NIC, Hangs on Boot

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I need to add a second NIC to my NT SBS 4.5 server. I currently have a Realtek 10/100 PCI (RTL8139) working fine. If I add ANY other NIC (PCI/ISA etc) the server hangs on reboot, just after listing my devices. I presuem it is a resource issue, but cannot work out where to make changes.

3 replies

by mtnsqs

Have you checked the CMOS to ensure the interuppt used is not already allocated to another ISA ?

by clive

Thanks for that, had already checked all that (allocated automatically). I actually resolved it myself this afternoon, by putting in both a PCI and an ISA card, and then the machine started straight up! Go figure. Thanks again.

This discussion is closed to new replies.