Discussion Locked

Adding a drive to Raid 5

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

What is involved in adding another drive to Raid 5? In particular a Hot Spare?

It has been suggested that I look into adding a Hot Spare to our server. Do I need to format and recreate from scratch?

Any help would be great.

Thanks
Rob

7 replies

by rogued,mcse

I assume you are using NT RAID and not hardware level RAID? Anyhow, if you are using NT RAID you will have to re-create the array if you want to include another physical drive. Sorry, but it is not that difficult nor time consuming. Good Luck

by tigre_269

Are you using software(Microsoft) RAID, or hardware RAID? Microsoft's implementation of RAID does not support hot pluggable drives, meaning NT won't recognize the new drive and automatically rebuild the stripe set. You have to manually rebuild it in Disk Administrator. If you are using hardware RAID, you should be able to configure the existing RAID and add the new drive as a hot online spare. Run the RAID configuration utlity that came with your card. I've used the Compaq Smart 2DH and 2SL RAID controller, great cards. As a reminder, make sure you have a backup and an image just in case something goes wrong. Hope this helps. Good luck.

by admin

If you are using hardware level raid inserting the drive and rebuilding the drive using the raid hardware utility is all thats needed. I recommed doing a full backup before inserting the new drive. Also once the drive has been inserted format if fist before rebuilding the drive (I am assuming you are using scsi HD) They do come with a low level format but you should still refomat.

This discussion is closed to new replies.