Question Locked

Annoying DVI Icon on monitor

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After waking the monitor a cyan colored icon appears as it fires up and persists for as long as two minutes. It is a rectangle with the text "DVI" accompanied with a small image of a DVI cable male end. What is it's purpose and how can I eliminate it or reduce the time it is displayed. It is not mouse clickable. I suspect it may be generated by the monitor. I am running Vista Ultimate SP1; DVI vid card and monitor.
Thanks.

5 replies

by seanferd

Make and model would be useful.
Actually, what graphics card and system (or motherboard) make and model? Do you have onboard video and a graphics card? Does the card have more than one output?

Where does the icon show? It could be generated by the monitor, and sounds like it is. Have you tried the monitors menu functions for settings? Have you checked the documentation? Perhaps it is telling you that you are not actually using DVI somehow. Is the cable plugged into the correct video port?

Are the BIOS settings correct? Does it know it is using DVI, and is it looking for the correct type of card slot?

It could just be an annoying bit of "marketing", like an OEM BIOS splash screen, instead of showing the POST messages.

by mikegarvey

Had to drop out after your kindly post. I'm back but have not worked on the issue since your last post. Are you willing to re-open the issue with me? I ran a Belarc report that answers most of your questions and I supplemented that with direct answers to those not handled with Belarc. I am not an IT professional, but a fairly decent amateur.

by seanferd

It just so happens I've found your post. :D

Right. Anyway, this is likely to do with the monitor itself, so we'd want to check there first. You can post any relevant bits of Belarc output if you like, but I suspect it will not help much, if at all.

Use whatever buttons on your monitor to access the on-screen menu. Look for a menu section referring to "Mode" - mode indicator, mode message, etc. May be under a "miscellaneous" or "other" heading. Find an adjustment to turn off the mode message or change the duration of it's display.

If you are having difficulty with the menu, refer to your monitor documentation. If you don't have a copy on paper or CD, visit the monitor vendor's site and find the manual for your exact model. If you post a link, we can look at it too.

This discussion is closed to new replies.