OK with Roxio if you are using Easy 5 you have to change the media type from CD to DVD or the other way around but with Roxio 6 this is an automatic process. That could have been your problem at the start.
As you have not said which version of Nero you are using it gets a bit harder but the latest version you still have to change from CD to DVD or you can leave it on the default CD/DVD which for some reason doesn't work quite as well.
I would just buy a single DVD and try it out as that is still the cheapest way to test your burner you do not need a spindle of 50 or 100 as if your burner has died for some reason you'll need the money for a new one which are currently Are $176.00 AU for Sony DRU800A Internal Dual Layer DVD burner, 16X max DVD+R/+RW & Dual Layer DVD Burning (max - 16x CAV; 8x ZCLV; 4x CLV), 16X max DVD-R/-RW & Dual Layer DVD Burning (max - 16x CAV; 8x ZCLV; 4x CLV), 48X max CD-R/CD-RW CD Burning (max 48x CAV; 24x ZCLV), Works with 4.7GB DVD-R/DVD+R/DVD-RW/DVD+RW and 8.5GB DL DVD+R/-R Discs, 2MB Buffer Memory, Includes Nero 6.6 Software Suite, Included Accessories - Black Face Plate, ATAPI Cable and Mounting Hardware, User?s Manual.
You can find a exchange rate converter at the following URL http://xe.com/ which will give you some idea of the RRP in your area and most likely you'll be able to pick one up cheaper anyway. I like the Sony's as I've had very good results with them and have yet not had one fail after 3 years of using them, The pioneer ones don't seem as good as I have one in my LY which is begging to show signs of problems and it was only new in December so I'm a bit put out by the whole thing. The Liteon's don't seen to be as good either and are about the same RRP as the Sony's so for the $3.00 AU difference I always use the Sony Model and as the single layers are now almost a non issue they are not cheap enough not to make them worthwhile currently they are only $30.00 AU cheaper than the Dual Layer units so again