5 replies
by liampeter1 Accepted solution
by toughguy000 Accepted solution
Please provide more details with your post.
OS:
Motherboard:
Any errors in driver manager:
What you have tried:
Also one suggestion would be to make sure your old video drivers are removed. This is a very common mistake when upgrading computer components.
by liampeter1 Accepted solution
OS: Windows XP
Motherboard: no idea, where can i find out
Any errors in driver manager:
no idea but on DXDIAG under display under main driver its
Main Driver: vga.dll
What you have tried: installing the CD.
downloading and installing the software from ATI.
installing both under left click and Run As and unchecking a box
by passingby Accepted solution
If you get this warning:
---------------------------
Internal Failure
---------------------------
Error Number: 0x80040707
Description:
---------------------------
OK
---------------------------
..when starting the setup, it's a problem with InstallShield. You probably have (part of) your All Users-profile on an 'alternate' location. InstallShield can't cope with that. See http://consumer.installshield.com/kb.asp?id=Q108167
If that doesn't work, you might also have to change userprofile location to Windows default.
Good luck!
by reddigari Accepted solution
I had a similar problem today with a Diamond Stealth x1050 card. As I tried to install the software from the CD, I received the same error messages (0x80040707, islayer, 0x80040702, etc).
I got the card to work after tinkering for a bit and this is what worked for me:
The Catalyst *.exe file on the original CD (or the one downloaded from ATI) loads a new folder 'ATI' on the C drive. There is a subfolder in there with all the drivers. I installed the driver from this ATI folder via the Device Manager...This way, you won't have all the fancy items the full catalyst installer may give you, but the card worked!!!!!!!!
I am using Windows 2K, by the way.
This discussion is closed to new replies.
Trending Software posts
Sort by Trending