Discussion Locked

Backup

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I have a winnt 4.0 platform.
I would to copy a file from one server to another. It's a very large file approx. 19gig.The drive that I would like to copy it to is large enough to handle it.I tried dragging the file to the other machines directory through the explorer, but it was taking hours (approx.5 hrs)to copy over.My network card handles 100mbps. Is there another command I could use or some other software that would speed this up considerably.Or is this just going to copy over at the speed of the network card..Any help would be appreciated.Thank's in advance...

7 replies

by nmead

Try ftp'ing it over to the other machine\, FTP doesn't have the error checking/correction associated with File Server(SMB)-type opeations.

hth,
Nate

by earthworm

This may or may not help, but we recently switched our backup software to a program called Ultrabac. It supports backing up files to other servers Hard drives as backup media. It currently transfers over 25Gb of files in about 2 1/2 hours, by using compression before sending. It worked tremendously better than Xcopy, or Drag & drop.

by valachi

Check the NT Resource Kit. It contains a command line utility named "robocopy" (robust copy) that can help you copy this file. Also, in order to improve the speed, you can increase the priority of the robocopy command (once launched) to High (Task Manager, right click on the process; don't put it to Real Time) and put the Performance cursor in the middle (so the foreground application will not receive more processor clock. I would also check if the connection is indeed 100 mb: most of the people leave AUTO (when the card is 10/100) at the card's speed negotiation and routers settings or other things can diminish this speed.

This discussion is closed to new replies.