To really repair this you should get hold of a Windows disk.
NTOSKRNL.EXE is missing or corrupt.
Related errors:
Below is a listing of the full error message that may be related to this error.
Windows NT could not start because the below file is missing or corrupt:
C:\Winnt\System32\Ntoskrnl.exe
Cause:
1.Keyboard issue
2.Miscellaneous corruption
3.Corrupt boot.ini file.
4.Missing boot.ini file.
5.Missing or corrupt ntoskrnl.exe file.
6.Windows NT installed on a partition bigger then 7.8GB
7.Corrupted hard disk drive or severely corrupted Windows.
Solution:
Keyboard issue
This issue has also been known to be caused by a short in the ground wire in the keyboard cable. Make sure this is not the cause of your error by replacing the keyboard with a different keyboard or simply just disconnecting the keyboard from the computer.
Miscellaneous corruption
Before trying any of the below recommendations it's recommend that you attempt to load the last known good configuration.
Corrupt boot.ini file
This issue is often caused when the boot.ini is missing or improperly configured. This issue often arises after a user has recently added or removed an operating system on the computer or added or removed hard disk drives in the computer.
Make sure the line pointing to the operating system and it's drive and partition is properly configured in the [boot loader] and [operating systems] section. Additional information about boot.ini can be found on document CH000492 :
The "boot.ini" is a Microsoft initialization file found on the Microsoft Windows NT, Microsoft Windows 2000, and Microsoft Windows XP operating systems. This file is always located on the root directory of the primary hard disk drive. In other words, it is located at "C:\" directory or the "C Drive". This file is used by Microsoft Windows as a method of displaying a menu of operating systems currently on the computer and allowing the user to easily select which operating system to load. In addition, this file is also used to point to the locations of each of the operating systems.
Basic example of the boot.ini file
[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect
In the above example, the boot.ini contains two sections, the "[boot loader]", and "[operating systems]". Within the boot loader section there are two lines. The "timeout" line is used for how long the boot menu time should be displayed, in seconds; we recommend that the timeout be set to at least five if you wish the computer to boot faster and commonly use the default operating systems. The "default" line is the default operating system that the boot.ini will load. If multiple operating systems are in the boot.ini, the default operating system will be automatically selected and used if the user does not specify a different operating system by the time the timeout value expires.
Missing or corrupt ntoskrnl.exe file
If the ntoskrnl.exe file is corrupt or missing this can also generate the error. To restore this file follow the below steps.
1.Insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD it is likely the below steps will not resolve your issue.
2.Reboot the computer, as the computer is starting you should see a message to press any key to boot from the CD. When you see this message press any key.
3.In the Microsoft Windows XP setup menu press the R key to enter the recovery console.
4.Select the operating system you wish to fix, and then enter the administrator password.
5.Type expand d:\i386\ntoskrnl.ex_ c:\windows\system32
6.You will then be prompted if you wish to overwrite the file type Y and press enter to overwrite the file.
7.Type exit to reboot the computer.
Corrupted hard disk drive or severely corrupted Windows
Attempt to check the hard disk drive for any errors by running the chkdsk error. To do this follow the below steps.
1.Insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD it is likely the below steps will not resolve your issue.
2.Reboot the computer, as the computer is starting you should see a message to press any key to boot from the CD. When you see this message press any key.
3.In the Microsoft Windows XP setup menu press the R key to enter the recovery console.
4.Select the operating system you wish to fix, and then enter the administrator password.
5.Once at the recovery console type chkdsk /r
6.Once completed type exit and see if issue is resolved.
Please post back if you have any more problems or questions.
If this info is useful, please mark it helpful. Thanks