Discussion Locked

BACKUP TAPES - Netware to NT?!

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have just ditched our Netware servers for
an NT4 only Net. We had been using ArcServ
to do all our tape backups with Netware
using the DDS DAT tape drives.

Our new DAT drives are all compatible
with the old Netware tapes but we areunable
to use them in NT Backup because of the
format difference. What is a solution to
this? We need the backup data on these old
Netware tapes. Should we install the ARC
Serv backup program in hopes that it will
allow us to read the old tapes? We kind of
wanted to switch to the Backup Exec program
and avoid the ARC Serv...but if we have no
choice we will use the ArcServ program.
Are we doomed to crank up Netware again
just to read these tapes?

Depending uponyour answers, what
versions of the program would you
recommend? (ArcServ or Backup Exec)

Mahalo [thank you] very much for your
wonderful help!

mrk
Systems Admin
Spectrum Hawai'i

5 replies

by spydergst1

You are doomed to crack up Netware agian just to read /restore the tapes. The is no way Arcserve for NT can read a Arcserve for netware tape.

Your enviorment will determine the software you should use as a permanent backup solution. Personaly I would stick with Arcserve.

by leo.valmores

I suggest that you stick with ArcServe. Switching from NETWARE to NT ArcServe versions would not impose a very steep learning curve, as opposed to switching to BUP_Exec. That is because I guess you have developed sort of expertise already on ArcServe.

If you opt to switch to ArcServeIT for NT, they have NETWARE Agent you can load and allows to to BUP or restore data from NETWARE to NT machine.

Check with cai.com website and they have a program that allows you to test-drive any of their ArcServeIT or ArcServe2000 products. Depending on your network infrastructure/servers setup, you can get Workgroup, Advanced or Enterprise editions.

Good luck and Salamat!

This discussion is closed to new replies.