Discussion Locked

Becoming asmall ISP 4 dial-up connection

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

OK! I have the computer (Pentium II 600Mhz, 128 Mb Ram and 20GB HDD). I also have a dedicated phone line with an ISP.
I'd like to make my computer a server. That means that the other will call my numbers and get connected through my own connection.
What kind of equipment do I need and what Software should I use (for dial-up answering, IP managing and the rest!). I'm new in domain and need informations...

5 replies

by rgarner

You didn't mention your operating system and the number of connections you want to support. Here is a brief description for a poor mans ISP. You need Windows NT 4.0 with the routing and remote access (RRAS) add on (free from MS), DHCP server (NT),DNS server (NT or from your ISP), TCP/IP protocol, multi-serial card and modems (Digi International), multiple phone lines . Install NT services and modem hardware. Choose an internal IP address range (192.168.0.0), set your default gateway to thededicated address provided by your ISP, check route IP on the protocol properties, setup your dhcp (address range, router, dns), set RRAS to use dhcp, setup and account for each dialin user.

Good Luck

by schitzoid

since you didn't say that your phone lines were anything but pots, i' recommend v.92 modems, as they have faster upload speeds.

This discussion is closed to new replies.