Question Locked

Black screen but sound was on

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

While watching a video clip my screen suddenly went black but the sound continued to the end of the clip. I restarted windows but nothing showed up on the screen although windows loaded up and I even entered the password without seeing anything on screen but nothing showed up except the normal sound of windows loading up. I cleaned everything, unpluged/pluged everything but still the screen is just dead black. Any feedback?
I have an onboard agp. Could it be the AGP?

14 replies

by thechas

Do you get the POST screens when your system first boots up?

If so, try booting into safe mode (F8) and see if you have video then.

If you have video in safe mode, change the settings to use the safe mode defaults and then boot into normal mode.

You should then be able to adjust your display settings and get back to normal.

If you have no video at POST, the next step is to try a different monitor, or connect your monitor to a different computer.

For an LCD monitor, it is possible that the back-light failed while you were watching the video.

If the monitor works on a different computer, you can try installing a video card.

Chas

by urxtradark

Hi thanks for the valuable input.
1- I don't get ant video at POST at all
2- I only get all the normal beeps and I enter my password as usual and hear the Windows log on music but no video.

* I have Nits LCD Monitor with AGP SIS 315P built onboard a P4XV ASD2+ Mainboard
I am now trying to test the computer with another monitor or otherwise test my LCD monitor on another computer. I may have to install a new VGA card

by ron k.

I don't know everything but all of my computers give a POST beep (singular). Beeps generally seem to signify something wrong and the pattern of beeps tell what's wrong.

by thechas

Video cards and on-board video do not fail very often.

I suspect that you will find the problem is with the monitor.

If you press the menu buttons on the monitor, do you get the on screen display for monitor settings?

If not, that is further evidence that the monitor itself is bad.

If you do get the menu display, it could still be the video cable or the video circuits inside the monitor.

Chas

by ron k.

Instead of the quasi-morse code bulls**t. It be easy if Rocky and Bullwinkle played, you'd know it was bad RAM or whatever instead of having to concentrate, "was that a long beep or a short beep."

by boxfiddler Hot topic

if it's the video card, the beeps should play 'I can see clearly now, the rain is gone...'.
If it's the sound, the beeps should pley 'Singin' in the Rain'.
If it's a processor error of some kind, the beeps should play 'They're coming to take me away...'
If it's a hard drive error, the beeps should play 'I can't get no...'

I could go on, but I've had too much fun already today. :|

by santeewelding

I missed this earlier.

Way too involved in the course of the world in another place.

We put yours up in a frame.

by boxfiddler Hot topic

One for Discussions, one for Questions. Click-click. ;)

by urxtradark

I tested my computer with an old CRT monitor and it worked perfect. The data cable was 100% perfect. I am suspecting the AC/DC converter that feeds the LCD monitor to have failed. I am going to disect it all open and see which part of it has failed. No, the menu on the LCD screen doesn't display anything at all, the only button that is working is the power button, so literally it just turns on and off and I've noticed that the green color when it is on is a bit fade than before. I guess my fancy LCD Monitor has died at the age of 4. By the way its brand is Nits and it was made in China. Two thumps up for your perfect assumptions about the onboard AGP and your guess of the monitor.

This discussion is closed to new replies.