Question Locked

Bluetooth Travel Mouse intermittently stops working; has to be reinstalled

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My OS is Vista 32-bit and the Bluetooth hardware is a Dell Travel Mouse.

I can go for months without any trouble, but for reasons I can't figure out it will just spontaneously stop working - and then it seems to happen all the time for a few days.

It doesn't seem to correspond with any new software or hardware installations ... or any Windows updates.

When it quits working and I check my Bluetooth devices in the control panel sometimes it is still there, but other times it's disappeared.

If it's still there, I have to remove it and then reinstall and, if it's gone, I just reinstall it. And voila - it's works again.

Is this just something wonky with Bluetooth (or Vista) I have to live with - or is there a solution? (It's really a nice little gadget when it's working).

Thanks

4 replies

by ---tk---

going to the manufacturer's web site, locate the latest and greatest drivers, and try installing them. If it still occurs I would then try a few versions before the latest and greatest (if there are any available).

One thing I would look out for are other bluetooth devices, you might be getting interference from other devices. Its a shot in the dark, but next time it happens I would look around for other devices...

by tintoman

That I'm not in the least bit surprised to hear this, the fact is that Bluetooth simply doesn't work properly in Vista, I have exactly the same trouble with my Bluetooth headset and phone, all of a sudden Windows thinks it's a new device and wants to reinstall it.
Some features of the devices never have worked properly either.
Not much help I know - might be worth mentioning that so far I have had no such trouble with Windows 7

by jjoeclark

when u loose connection again, and u will. go to device manager and under BT, right click and disable the already X out enumerator or 355 BT. Say yes to prompt and then go back and right click on Enumerator or 355 BT and ENABLE. Your mouse will be back in a second. No more reinstalls that take 5 minutes.

Joe

This discussion is closed to new replies.