Discussion Locked

Booting from 40Gig USB Hard Drive

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hey guys, I'm having trouble! I want to be able to boot from a 40gig USB hard disk, it is all setup with the correct sys files but when i do an f12 to change boot option it comes up with Invalid Sysytem Sisk, replace the disk and then press any key.

3 replies

by hal 9000

Was loaded while in a USB Caddy there is something wrong with the file structure.

However if the Drive was loaded in the computer it's likely not to have the USB Drivers included to allow it to boot from a USB Port so you get that error message as the computer can not read the USB Ports at that particular stage of the Boot Sequence.

Or if it was setup correctly on another computer the USB Drivers are incorrect for that system.

Col

by dma69593

I'll give you my answer but please remember that this is for discussions, and use the questions section for help.
If you have installed your OS onto an external hard drive, you cannot boot from it. It just doesn't work like that (it's a nice concept if you could). Your external hard drive is better used for saving/backing up your data and files.

by dma69593

I forgot to mention why. OS (like XP) when starting up looks for the boot.ini file.
The hard drive that has the OS installed on it, is identified by a fixed disk number and the partition in which it is located. Removable disks, like your external hard drive, does not have fixed disk numbers which is why you are having problems because your OS cannot find the system files.

This discussion is closed to new replies.