Discussion Locked

Browse List

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have a single NT domain with 4 remote sites, the browse list is truncated from site to site, we have a 10/100 switched network with TCP/IP as the only protocol, we have subnetted our network also, any idea why the browse list would be incomplete?thanks

5 replies

by ctpalmer

You need to add WINS server to the PDC and add the WINS IP address to all of the client machines. Another thing to remember is that Windows 9x machines only appear in the browse list if they are sharing files or printers. Hopefully this should take care of your problem.

by coolflip

Dhashamy,

I have experienced this before, when one of the subnets weren't posting the computers listed in its subnet. First off, make sure that on each subnet there is only one browser available. If you are running an all NT shop then you can go to REGEDIT to disable all workstations except one that is designated as the browser for that subnet. This usually fixes the problem. If you are still having problems then I would suggest to run this command from DOS --> nbtstat -RR This would be able to refresh and reload the current listing of the workstations on your subnet. Keep in mind that it will not happen instantaneously since the browser has to replicate its listing to the master browser of the PDC. So, I would check on it the next morning you come in from work. See if this helps.

Good Luck,
CoolFlip

This discussion is closed to new replies.