Discussion Locked

Bugcheck

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My computer crashes and reboot by it self. I couldn't figure out what the problem is.
The computer generate the following error message in the event viewer: "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009c (0x00000004, 0x00000000, 0xb2000000, 0x00040151). Microsoft Windows NT [v15.1381]. A full dump was not saved."
Any idea!

5 replies

by curacao_dejavu

It's a harware error:

See the MS KB Article ID: Q162363

The computer processor detected a hardware error and reported it to Windows NT using the Machine Check Exception (MCE) feature of Pentium processors or the Machine Check Architecture (MCA) feature of some Pentium Pro processors.

MORE INFORMATION
Windows NT Server and Workstation version 4.0 now have the ability to report exceptions generated by the MCE or MCA features.

The Pentium and Pentium Pro processors provide a mechanism to detect and to report hardware-related problems such as memory parity errors and cache errors. To signal a hardware error, the processor signals the detection of a machine check error by generating a machine check exception (Interrupt 18). Windows NT simply reports the fact that the error occurred and displays parameters that you can use to decode the exception. Contact your hardware vendor or processor manufacturer for information regarding the Machine Check Architecture or consult theIntel Pentium Pro Family Developer's Manual - Volume 3: Operating System Writer's Manual.

by awillis228

This is a machine check exception error. The computer processor detected a hardware error and reported it to Windows NT. You have to consult your processor manufacturer

This discussion is closed to new replies.