9 replies
by mtnsqs
If you have no idea where to get your supplies from , then you probably will have no idea what to do and will get into lots of trouble.
Firstly attedn soem hardware courses - I don;t knwo where you lice, but most schools or tertiary education systems have nioght or weekend schools teaching this kind of thing.
Secondly get to your lcoal library and read lots of books!
Finally, you buy parts from regular computer stores, swap meets, markets etc. If you are really at the low end playingaround, how about tryign to find peopel who are throwing out thier old computers - the troubel is to get these going you need lots of knowledge.
by rockamocka
by dmiles
I can provide the sites to tutorials that will help
1)Build Your Own PC
http://verinet.com
2)On Line Tutorial:Build A Computer
http://www.stdout.org/computer/
3)Building A PC in 19 Steps
http://www.strut.org/building a pc/welcome.htm
http://barnettcomputerservices.com
http://www.tech-advice.freeserve.co.uk/index
www.pacificnet.net
Computing-Hardware-For the Industry-Hardware Companies-Computer Systems-Desk Top-Built at
http://www.looksmart.com/eus271068
http://www.pcmech.com/build.htm
These sites will be a good starting point to get you going by reviewing the tutorials and then you can always get help from the Tech Republic Forum - You have access to start a discussion,when you fing something that you donot understand.Study the tutorials before attempting to build
Good Luck
by rockamocka
by csmith
Building PCs now adays is very easy because you have intergrated components available.
(I started in the days of discrete components.)
First you need a case with a power supply.
Install a motherboard (with CPU) in the case.
Case, PS, and MB should be the ATX standard. (Versus AT)
Install a Hard Drive in the case, and hook the cable to the MB. (First IDE channel)
Install CD-ROM, and hook up the cable to the second IDE channel on the MB.
Install floppy drive and hook up the cable.
Install a graphics card in a slot on the MB.
Leave the case open in case it won't boot.
Plug in the keyboard, and attach the Monitor to the graphics card.
You now have a basic PC.
These are the basic steps, and there is not enough space here for the details.
Enter the BIOS settings.
Partition the Hard Disk, and then format it.
Load the Operating System. (Windows)
You will now have a running PC.
Another good book you can get at the library is:
Upgrading and Repairing PCs
by Scott Mueller
This book has a lot of information on why you are doing what you are doing when you build a PC, not just the how to do it.
This book has at least 12 editions out.
Regards, Chris
by rockamocka
by sgt_fitz
by rockamocka
by rockamocka
This discussion is closed to new replies.
Trending Web Development posts
Sort by Trending