Discussion Locked

cable modem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How can i hook up two computers to one cable modem. i'm using a hub and both computers can see each other. however i can only connect to the internet on the original computer. any answers?
thanks,jon

5 replies

by ann777

Unless you have two ip addresses from your ISP, it cannot be done with just a "hub."

You need to purchase a Broadband Cable/DSL router. It will NAT (Network Address Translate) your one ip address and share it with any and all computers on yourinternal network. It is also much more secure.

by wilscor41

I thought win98 se and win me had an internet sharing capibility. Has anyone had experience with this. I'm trying to avoid the expense of a router.

by mark t

Win98SE and ME can use Internet Connection Sharing (ICS).

You will need two network cards in the host computer one card connects to the modem and the other card connects to the local network (through hub).

The host must be on and connected to the Internet for the local network to access the Internet.

There is plenty of information in ICS available. For a start check Windows Help (Start|Help) and search for ICS.

Then check

http://www.helmig.com/j_helmig/icsw98se.htm

and

http://www.practicallynetworked.com/sharing/sharing.htm

Good luck

This discussion is closed to new replies.