5 replies
by shiny_topadm
by rmodd99
by mckaytech
There is really no universally accepted color code for RS-232C. There are four possible connectors (DB9 male or female and DB25 male or female) and two general configurations (null-modem or straight-through)with a few special variations on the control lines.
To translate from the 9-pin to the 25-pin configuration, the pins are as follows:
DB9 DB25 pin name
1 8 DCD
2 2 RxD (receive data)
3 3 TxD (transmit data)
4 20 DTR
5 7 Signal ground
6 6 DSR
7 4 RTS
8 5 CTS
9 22 RI
What I usually do is just make a four-column chart with the pin at end1, pin at end2, color, and pin name and then just connect the pins to the right color as indicated by the chart I've made. Often, a particular connection will only require 3, 4 or 5 of the wires.
Hope this helps you get started.
paul
by rmodd99
by rmodd99
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending