Question Locked

Can a disk of a smaller size be "cloned" to a disk of a larger size?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am upgrading from a 120Gb ATA HD to a 2T WD Caviar Black SATA. The problem is that I have just finished reformatting and reinstalling the majority of my software on the 120Gb disk. Is there any way to avoid having to do this all over again on the 2T disk?

4 replies

by ic-it

You should be able to use the manufacturers disk to accomplish this. If you did not receive a disk; go to their website and download it.

by dldorrance

You should install both drives in the same computer, carefully noting which is which. Then download the ISO image of which ever cloning program you use, and burn it to a bootable CD (aka Live CD) and boot from the CD.

One program is Acronis True Image, a free download
http://download.cnet.com/Acronis-True-Image-Home/3000-2242_4-10168093.html

Another is GParted. This is a Linux program so it uses Linux designations of drives.
http://sourceforge.net/projects/gparted/files/gparted-live-stable/

In either case it is essential that you know which drive is which.

by oh smeg

Depending on the M'Board in use here you may have a problem as the IDE Drive will not have the necessary drivers to allow the system to Boot from a SATA Drive.

You may be required to do a Repair Install of the OS to include the necessary SATA Driver.

Also if you fit another IDE Drive or format the existing one because it is the Hardware Allocated Boot Drive the Necessary Files to point the system to the Boot Files will no longer be present. However if you completely remove the drive and the M'Board supports SATA as a Native Drive type it will work fine.

This all depends on the Make & Model of the M'Board though.

In addition to the above suggestions Clonezilla is also available and it's also free. ;)

http://clonezilla.org/download/sourceforge/

Col

This discussion is closed to new replies.