11 replies
by philip lee
there's a few option here that you can choose.
1, Windows' ICS (internet connection sharing)
2, Proxy software
3, NAT software
Network Address Translation (NAT) would be the best.
by adeshpcs
Yes you can. There are some programs that will allow you to do this. One of them is ishare. The following site will show you how to use the program.
http://support.nashville.com/ishare.html
by qtzar
Hi,
I've just recently set up something similar on my home network. I would suggest that you look at some NAT based software as this will provide the easiest setup as there are no configuration changes required for any apps that access the internet via the shared modem.
The product that I used is called 'SyGate Home Network'. It was very easy to setup and does not cost too much. You can get more info on their website at http://www.sygate.com/
If money is a problem and you are running Win98, WinME or Win2k on the machine with the modem in it then ICS ( internet connection sharing ) is a free option that you can look at. I know that the Win2K version of ICS has NAT capibilities in it, I'm not sure about the Win98 or WinME versions.
For the laptop, once you have the NAt server setup all you need to do is set it to obtain it's IP address from the DHCP server and away you go.. ( the DHCP server is normally installed as part of ICS/sygate etc.
Hope this helps you out...
by mark
by philip lee
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending