Discussion Locked

"Can not logonto domain Server"

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Small business Server 2000, clients with win98.

When they try to logonto the network they get a

"No domain Server was available to validate your password. You may not be able to gain access to some network resources."

However if Igo ok, I can access some mapped network drives, I can also ping the server.

Outlook will not open.

help please....

13 replies

by fenaikh

pls try these.
1-start->setting->control panel->network-> (mark) TCP/IP Dail-up adapter-> (click) properties-> (mark) Obtain an IP address automatically.
2- IN your browser make sure you have the correct name of your ISP server or PUT the correctIP address. (maybe miss typing)

by mackem

Two possible answers that I can think of for this one. First check that you are pointing to the exchange server in exchange server properties. Second, I had a similar problem a couple of weeks ago. The tcp/ip stack is not set up correctly. You will need to remove Tcp/ip from you nic and then reinstall. this worked fine for me.
Hope this helps.

by curlergirl

Are you using DNS or WINS or both? I believe that you might have to keep WINS running with win9x computers unless you manually set up DNS. Anyway, whichever you're using, be sure that the workstations are getting the IP address(es) of the WINS/DNSserver(s). This is usually done through DHCP or can be set statically. Is this happening on all clients? What mapped drives can you access and are these being mapped from a login script or manually from the workstation(s)? Have you checked to besure that workstations are properly joined to the domain? Lots of questions - not very many answers, sorry! Hope this helps!

by vh_s

Go to the Network applet in Control Panel.

Click on Client for Microsoft Network and click properties.

Define your domain name (not server name) correctly. I would advise to retype the whole domain name just to make sure.

Hope it helps.

This discussion is closed to new replies.