Discussion Locked

can you assign IP to computer's printer

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
This might be a stupid question but I have a printer attached directly to a workstation that I would like to assign an IP to. I've done this using jetdirect print servers in the past but I was wondering if there was a way to do this using the the computer? I know you can share printers on a Windows NT network but this is a Unix server that needs to print to this printer. Thanks

7 replies

by wanabedrsean

no you cannot assighn a ip to a printer connected to a workstation the ip of the printer is the ip of the print server. With jet direct devices or milans the box that you hook the printer to is a print server and could be considered a server appliance. when you give a jet direct box an ip adress dont think of it as giving the printer an ip address think of it as giving a server with the printer atached to it a ip address the same is true for the internal jet direct print servers. so in a sense your workstation is acting as a print server so if you need to print to it from a unix box then use the ip address of the workstation combined with the printer share name as the device you are printing too.like this \\10.10.10.9\printer1 and it may work.

by schmrand

Like he said, you can print to the PC's IP address but you cannot assign a separate one for the printer. The good news is that you can get an lpd daemon (which a Unix box will talk to) for Windows - in fact, NT has one in the install disk. For '9x, search for "lpd" or "lp daemon" on Google.

by @lberto

No, you can not assign an IP address to a printer device, what you can do is assign an IP address to a Netport which contains a NIC built in, and attach the printer to it, that's the way Jetadmin works. If you have a workstation with a printer attached to it of course you can assing an IP address to the computer but never direct to a printer.

Good luck,
@lberto

This discussion is closed to new replies.