Question Locked

Cannot connect my Vaio TX5XN to a Dell monitor

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
When i connected my vaio to the lcd dell monitor vai vga (which is only about 3 yrs old and works perfectly), nothing happend. Screen is cracked on the vaio so i can only see half the screen. I have tried everything like using the windows mobility centre, and fiddling with the display settings but i still get nothing. Oh and Fn+F7 doesnt do much apart from give you two options "lcd only" and "setup", lcd only does nothing and setup gives me a window with one checkbox.....rubbish.

Sony Vaio pcg-4k!m
with vista

if anyone can help mucho kudos..

12 replies

by nepenthe0

This may not work, but it is something you haven't tried.

Navigate:

Control panel > Display > Settings

Drag the #1 monitor icon into the #2 slot. Click 'apply'. Then cycle through the Fn-F7 toggle until the monitor awakens.

Let me know if this works for you.

Rick/Portland, OR

by shpati

Cool i havnt tried that yet i was about to loose faith in this completely cos i just tried hookin the monitor on my gf's old IBM laptop and i got it to work in 30 secs, ive been trying to clock this all day!!

by shpati

yeeh good effort dude but that didnt work. Heres the thing...

When i have the two (laptop and monitor) conected, there is no reaction on the monitor side at all, the defualt "green red blue white" floating window bouncing around.
However....
when I pres fn-f7 and i select the setup icon i get a box called "External display dettencion setting" with this is a bried dialogue and a check box labled change the external detection method. If i check that and apply it, the monitor imedietly reacts and goes into powersave mode....
which is the reaction i get out of it immedietly after i pluged it into the old IBM and before i pressed f7 there and it worked a charm. However even in this mode its still as unresponsive to anything that i tried... im baffled :(

by nepenthe0

I have heard that some Plug 'n Plag devices such as monitors must be connected and powered on before you boot up the computer.

Try connecting the 2nd monitor, power it on, and reboot the Sony notebook. Let me know if this works.

Rick/Portland, OR

by shpati

Before i did anything i hooked t all up then turned on the laptp.... so i guess another one down :(

by older mycroft

Whatever that trauma was, if it occurred with the lid shut, perhaps pressure went through the keyboard into the internals?

You might be looking in the wrong place. :(

by nepenthe0

Check the Device Manager

C:\Windows\System32\devmgmt.exe [Microsoft Common Console Document]

or Control Panel > Administrative Tools > Computer Management > Device Manager

Look in 'Monitors' and determine whether or not there's a driver problem with the attached monitor.

If you can fix it with a driver update, that would be vastly preferable to an extensive hardware examination.

Reply by follow-up post, and perhaps Old Mycroft can walk you through to a resolution. Alas, I've reached the limit of my knowledge.

Rick/Portland, OR

by shpati

I really doubt that the cracked screen has much to do with this not workin, i do get a sign of life as i mention when i check that box as i mentioned. However nepenthe0 i dont see it on device manager, i only get the laptop generic pnp monitor......??? pfff annoying

by shpati

I still have no clue as to why this mofo wont output to my external monitor when that old brick IBM laptop worked in seconds....

by rob miners

Change Sony Vaio External Display
If you cannot change the display output with the Fn+F7 keys, you need to use VAIO Control Center. Launch the VAIO Control Center, select the control item for the external display, and cancel the check box for enabling the automatic function to select the the external display for the output.
Then try the Fn+F7 keys to change the display output.

Worth a try :)
< missed an n and didn't leave a space :) >

by older mycroft

Has the "old brick IBM laptop" also got a cracked screen?

Has it suffered any trauma?

If the answer is no to both questions you are hardly comparing 'like with like'.

Why do you doubt that whatever trauma cracked the screen, STOPPED at the screen? Clearly the screen couldn't withstand the force that was applied because it is now cracked. That would suggest the force carried on downwards into every component that is sandwiched tightly together in the laptop chassis.

If anything the mobo (or graphics card) is less robust than the laptop lid and screen.

Just my opinion though.

This discussion is closed to new replies.