Discussion Locked

Cannot connect to the Internet!

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm not even going to go into what I've already done to get to this point..that would be far too exhausting. So...here's where I'm at:

I have the new server with SBS 2003 connected to the Netopia router via the 3com NIC and plugged into our network via the integrated Broadcom? NIC. I have a cpl of new client workstations setup and are able to access the shared drives on the server.

The server and clients can both access the Netopia router's status page. But neither can access any webpages.

I have a feeling that I've got the DHCP and IP addresses all mixed up for 1 or both of the net adapters. (Partially because I had a Firewall attached too, but I've now removed that just to see if I can get the basic Internet connection to work! FYI: when the Firewall was attached I managed to get the server to access the Internet but clients could NOT access the Internet BUT COULD access the shared drives on the server)

Please help me straighten this out! If need be, start me from scratch.
Thanks in advance!
Tink

6 replies

by jaqui

cause if you really couldn't get online you wouldn't be able to post the problem.
;)

by tink!

I posted when I was at home.

However, I managed to get the problem fixed this morning as I am now posting from work.
=-)

Now to figure out how to put the firewall in....

by jaqui

I couldn't resist though.

not a windows person so no advice on the problem.
but the title is kind of a mi label of the issue..
when taken leterally. :)

by sardukkan

So, what was the fix? It sounded like the SBS server may not have been hading out the proper DNS servers or, you might have had 2 DHCP servers runing. Did you get the firewall in?

by nzbn

Point the default resolver to the FW NIC so when the DNS server cant find the name on its network it sends it to the FW, The FW then says thats not me and sends it out onto the net.

Is your FW acting as a Proxy also?

Troubleshooting,

Is the FW on the same subnet and ip range?
can you ping the FW?
can you ping the router that is on the other side of the FW?
can you ping an external address like google.com?
Dont forget on the clients to set the preferred dns server.

by tink!

I removed the firewall to simplify things so I could fix the connection problems first. I will install the firewall at a later date. If I have problems, I'm sure you'll see my posts.
Thanks for your input tho.
Tink

This discussion is closed to new replies.