Discussion Locked

Cannot Format C: Drive in Windows 2000

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I can't seem to format my C: drive in Windows 2000. I get an error message that says "Cannot Lock The Drive. Volume Is Still In Use."
I have tried to use the format c: /x command to dismount the drive before it tries to format it, that did not work. I tried to boot the computer in safe mode and then tried formatting it, that did not work. I tried opening up the task manager and close all processes that were not vital for the O/S to continue operating normally, and then tried it. It did not work. Does anyone have any other suggestions that may work so that I can format this drive. It is a Dell Laptop running Windows 2000 with a 800 mhz Pentium III and 128 megs of Ram, not like it matters.

7 replies

by fenaikh

Hi
You need to create a bootable disk using win2k (for FAT,NTFS)

1- Copy the win2k Setup Disk 1 to a new floppy.
2- Copy NTLDR from your computer to the floppy.
3- Copy from your computer Ntdetect.com to the floppy.
4- copy from your computerBoot.ini to the floppy.
5- Put the floppy in your A: then reboot.
6- From a: format c:

Good luck
Mohamed

by liquidcoolit

You can't format your C: Drive from windows. the reason being is that windows locks the drive because it is where is places its boot files it needs to load. If you format the drive you won't be able to boot windows and you will have to do a completere install.

If you want to reinstall Windows, then boot the PC from the CD and format the drives from the setup

Cheers ....

by nettek

You cannot format the drive that houses the operating system using commands that reside on that drive. Your laptop should have come with a recovery CD-ROM. Put that disk in your CD-ROM and restart your computer. There will be an option to format thedisk.

This discussion is closed to new replies.