Discussion Locked

Cannot see W2K Workstation in NT4 Domain

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Can anyone help me with the correct configuration, or the reason why I cannot see a W2K workstation in a domain where the PDC and all of the BDCs are NT4 Servers? I have set the W2K professional workstation up in the domain, and I get the message that the machine has been accepted. I am able to log into the domain with my username and password, but I cannot see the machine in the Network Neighborhood. I am running SP5 on the NT4 PDC, and SP2 on the W2K workstation. Any thoughts??

Thanks,

Dennis

9 replies

by rstahler

Dennis,
Just wanted to know if you were able to ping that machine or ping from that machine to other ones on the network.

by sed55

I found the answer by dumb luck! File sharing was not turned on.. once I turned it on.. I could see the box on the domain. NetBEUI was not the answer. Thanks for the reply!

by peter ritchie

If your network settings aren't setup properly you won't see the workstation on the network unless NetBeui is installed on all the computers that need to see the workstation. If you want to see the computer; the easiest solution is to install netbeui.

Often, this problem occurs if you have not setup your network for DHCP. DHCP handles settnig up all the clients with the appropriate network settings rather than having to manually do it--which opens up the possibility of error.

If you're not using DHCP on your network I suggest you implement that to avoid problems like this in the future.

by sed55

File Sharing was not installed i\on the workststion. Once I did that, I was able to see the workstation.

by sed55

I stumbled onto the answer. I installed File and Printer sharing, and the machine showed up on the Neighborhood. NetBEUI did nothing.. uninstalled it..

This discussion is closed to new replies.