Desktop

Ask something
Discussion Locked

Canon MultiPass C755 Printer

0 helpful
3 replies

by lotel

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I contacted Canon Canadian side to find out WHY the Status Monitor will not initiate.They say issue with windows.It worked fine for 2 months.Now I can't print.I can fax.They walked me through the set again and still the software will not take effect.i thought a PORTchange would help but did not do trick.The Status Monitor says 8/1/2000 Release 320a 75P1U-01?I am about ready to throw this printer out of the window.Lou

3 replies

by grandhighdruid

I would suggest trying to print from a DOS prompt, especially after booting to DOS, and not using a DOS window. To do this, use the PRINT LTP1>(filename) and use any .txt file. If it will do this, then you have a software issue. If it does work, tryremoving the drivers completely, restarting the machine, and then reinstalling the drivers. From my experience, though, it sounds like a hardware issue. If it is only that old, then it should still be under warranty. If it fails to print, then I would call their tech support and tell them you have done this.

The only other thought (and it's just a thought) is that if you aren't using a high-speed printer cable, the printer may have decided to stop using it anymore. Hope this helps!!

by lotel

It is not up to speed and it is now printing on my new computer.i still have not resolved the problem.

This discussion is closed to new replies.