Discussion Locked

Can't get CD-Rom to work for install Win

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to install Windwos XP on my computer
(not the upgrade). I have two CD-Roms 1-R/W and
on Read only. I used the Win98 boot disk to
fdisk and format my hard drive. When I go into the
BIOS and set the computer to boot to CD-Rom first
and then put in the Win XP CD-Rom, I get errors
to both CD-Roms: ATAPI CD Rom...failure
ATAPI CD Rom...failure

Both of these CD-Rom drives have always worked
before and I have the R/W set as master and the ReadOnly set to slave.If I unplug the slave
the the master doesn't work either, it's like
one won't work without the other. Also, after
I formatted using the Win98 boot disk, I tried to
install Win XP from the CD-Rom and it detcted it
but went into a Win98 boot up menu even though
I set it to boot to the CD-Rom with the Win Xp
Cd-Rom in it and the Win 98 boot disk not in
the floopy. This is very strange, does anyone have
any ideas as to what could be going on here

17 replies

by hazzard_005

Try removing the cd/r drive and set the Ordinary CD-rom up as master. My guess is that the bios is getting confused as to which cd player you are trying to boot to. I know that the regular cd-rom is capable of being a boot device. And you can alway install the CD-RW after windows is installed.

As to the recently formated hard drive showing windows 98 on boot up. Did you format it with the 98 boot disk using the format /s option? That is the only thing which i can guess as to why it is showing up that way.

Hope this helps.

by ranjit

The easiest way to bypass this problem is to install the CD driver to the C: drive. First copy mscdex.exe from your Boot Disk, install the CD driver ( you can download the MITSUMI universal driver from their website then type setupd). Once your driver is installed reboot your system. Now insert your WinXP full version in CD rom type "SETUP" this will install the WINXP operating system. I have done this several times and it always works.

Hope this helps.

by mbr2

I used the Win98 boot disk w/ cd-rom support and typed
setup, and it says this can only be run in Windows.

Is there a certain switch that I should use to install
XP in DOS mode?

Thanks for the help!

by craig shepherd

I think the answer is before the software.
I have come accross this problem before and the reason it says failure is that older BIOSs don't allow for 'spin up time' for the CDROM's therefore can't read it. Try updating the BIOS and if that doesn'twork what you can do is try wierd boot combinations like CD-HDD-CD or something.

Also, why format your HDD before you install XP.
During the install you will be asked to partition and format anyway.

by mbr2

I tried just partitioning the drive and it came up
with "Invalid operating sytem, Please insert system disk."

by 1stladytech

If you cannot get the computer to boot on the cd drives, then you can make boot disks (usually takes 4 or more for WinXP, depending on Pro or Home). Go to the cd, and look for the bootdisk directory, there is a batch file that will create the boot disks that your are requireing inorder to get the opsys to load.

Good Luck,

Vickie

by mbr2

What is the name of this boot disk directory, and what is the
name of the batch file?

Thanks,

Mark

by kuhlio

I just did an XP full version install on my home machine. The easiest way that I know to install an OS is to just wipe the drive and start new. Use some sort of bootable disk that will allow you to wipe the hard drive clean. I use the IBM disk utility software, but a DOS boot disk will work just as well. Once the drives are clean and not partitioned, restart the PC, go into BIOS, and set one of the CD-ROMS to be bootable. Restart the PC with the XP install disk in the drive, and let XP do the formatting and partitioning.

by craig shepherd

As I was saying with my previous answer, your problem is probably with the BIOS. When it says Invalid Operating System Please Insert System Disk that's when it's trying to boot off a blank HDD.

Update your BIOS and then try booting off your XP CD

by thechas

It does sound like a CD drive / BIOS conflict.
Is the BIOS set to auto-detect the IDE channel that the CD drive is connected to?

I also recommend having just the standard CD-ROM drive connected at first. XP has a bug for dealing with CD-RW drives that is fixed in the downloaded updates.

You can download the boot floppy creation program from Microsoft. The file name is WinXP_EN_PRO_BF or WinXP_EN_HOM_BF
They are 5MB files, and use 5-8 floppies.

Chas

by m.g.davis

First check your motherboard documentation. You may have to set one of the CDROM's as slave to the HDD. I suggest the CDR drive. Check the Jumpers on all drives. Check your BIOS date as well. Boot using Win98 boot disk and select CDRom support.

This discussion is closed to new replies.