Question Locked

Can't get ST-Lab a-224 PCI raid card to install.

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to install an ST Lab A224 PCI card in with two 500GB drives in Raid1.

My issue is that I can't get the drivers installed as per instructions. Ctrl S or F4 comands just don't seem to do anything.

Tried installing drivers as from floppy drive but they were not compliant.

I have just given up for now.

Can anyone advise on where I am going wrong.

Ian

2 replies

by oh smeg

Generally when you use a RAID Array you install the OS to it and that involves pressing the [b]F6 Key[/b] when the first Blue Screen Appears during the Windows Install Process and then waiting till you are prompted to insert the Drivers on the Root of a Floppy into the A Drive and press Enter.

But as I have no idea what you are attempting to do here or what OS you are using you'll have to tell us so we can attempt to help you out here. ;)

Col

This discussion is closed to new replies.