Can't install Windows NT4.0

There are some new equipment that will not work correctly with NT4. Try using Windows 2000 or XP instead or 'downgrade' the machine somehow. Check manufacturer's page for more compatibility info.

Is ACPI enabled in the Bios?

if it is try and disable it.

have you tried to specify Mass storage device drivers?
(press F6 when the screen turns blue)

What about the proc?, NT won't support HT

you could also try and boot from the NT CD

I can't think of anything else it could be

Disable Plug and Play in BIOS. Also disable any unneeded peripherals on motherboard (LAN, Sound, USB) since NT 4 won't recognize or use them anyway.

Why are you installing NT 4.0 instead of 2000 or XP?

Try using a different memory chip.

If the problem occurs at the exact same spot every time, you could have a bad memory issue. The PC won't always recognize this type of problem. Try to run a trial installation of a 2k or xp off the cd. If the same file crashes everytime, you have a memory issue, if not, NT 4.0 just might not be compatible with your hardware configuration. Create new disks and try a different floppy drive too.

It is related to speed of your cpu.If you change your cpu with a p4 1.7 GHz, you can install nt4.then you must install service pack and then you can change your cpu tp p4 3GHz.

Thanks.