Discussion Locked

can't logon to domain

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a windows 2000 pro workstation that is unable to connect to the domain. I recently installed sp2 on it and had some issues so I ran a fast repair on the machine. It booted up fine and I can log on locally, but I couldn't log onto the domain. So I changed the pc name and changed it from a domain to a workgroup. Then I deleted the old pc name from the domain and tried to add the pc to the domain under a new name. It gives me the following error: "Your computer could not be joined to the domain because the following error has occurred: The interface is unknown." I can still browse to our file servers and print to some printers. However I can't add domain users locally or get out on the web from that machine. Any ideas on fixing this would be appreciated.

9 replies

by lintadsl

I assumed you have re-installed NIC if not, please do so, sounds like the NIC driver problem with Win2k. Still you have the problem, re install TCP-IP protocol.

"However I can't add domain users locally or get out on the web from that machine. "
Did you login as administrator and try to add a user which is already in the Domain?
I think you need to check with IP address you assigned on Win2k. Is that vaild IP for your proxy server?

Let me know how this problem goes, it seems notthat hard problem.

Sunny,

by seadogs

I have reinstalled the TCP/IP but not the nic. I will try that now. I was trying to add a user from the domain. The error I got at that point was the trust relationship between the pc and the domain had been broken. Thanks!

by seadogs

Now I've replaced the nic with a completely different one that has installed correctly. I can still see the network servers but not the internet. I changed it to a static IP address. Now when I use the wizard in my computer I get all the way to the last step to join the domain at which point I recieve the following error: "the domain name 'domain' is either invalid or does not exist." If I browse through explorer I can see 'domain' under MS windows network. Help!

by jsarinana

If the last answer did not work for you do the following:
-remove yourself from domain and reboot logging into your computer.
-Add yourself back to the domain (you'll need admin. rights). Reboot.
-log onto domain....

by tsnell

This is a problem that we also have. We have attempted to join the domain several different times and have been unable to. It gives us the same message ("Your computer could not be joined to the domain because the following error has occurred: The interface is unknown.") When logging in under a static ip address, we can see the network, but cannot get into our intranet or internet. The static ip address is the same as what it was before the problem occurred.

When using DCHP to configure theip address, we get the following error: Event ID 1006, "Your computer was unable to automatically configure the IP parameters for the Network Card with the network address 000103c50274. The following error occurred during configuration: The requested service provider could not be loaded or initialized."

This discussion is closed to new replies.