Discussion Locked

Cant see more than 2GB of my HDD

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
When installing W2K Prof it only detects 2GB of my 20GB HDD. If I create the partitions in fdisk before installing, Win2K setup shows the partition as damaged and wont install. If I install Win2k on the 2GB partition Disk administrator does not detect the unallocated space, and if I create the extended partition in fdisk after the installation Win2k Blue Screen on boot up, if I remove the partition its fine again.

3 replies

by idtent

Sounds like your using FAT, I would try to use NTFS instead. Also take a look at your BIOS. When you rate the answers let us know what it was and what worked for it. Good luck.

by justinh

I have checked all Bios Settings and have tried using NTFS / Fat, both get the same problem.

I have found a jumper setting on the Mainboard that for some reason prevents NT from seeing more than 2GB of my Hard Drive.

All is working fine now...

This discussion is closed to new replies.