Question Locked

Cat 3 cabling

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just discovered that my call center has old cat 3 cable throughout. Over 90% of our applications are web-based and the phones are VoIP. I would like to know what kind of issues I will face directly related to the cabling. I have 4 T1's into the building and 75 -100 seats at a time.

3 replies

by thechas

The big difference is going to be speed.

CAT3 just won't transfer data as fast as CAT5.

I think you will find that many if not most users are connected at 10MBPS rather than 100MBPS.

On the plus side, this gives you some amount of bandwidth limiting so that most users have an equal share of the T1 lines.

Chas

by nicknielsen

Particularly on longer runs. You may actually be getting some 100Mbps speeds on shorter runs, but with high error rates. Other problems will arise from the age of the network: corrosion in the connections, less physically secure connections, higher susceptibility to EMF, etc. Additionally, unless you manually limit them to 10 Mbps, your NICs will constantly attempt to negotiate back to a higher speed. You can head this off by configuring your network infrastructure to run at 10 Mbps.

This discussion is closed to new replies.