23 replies
by zack247 Accepted solution
by oh smeg Accepted solution
If it's some form of Windows look in the Device Manager Window and see what is there. Any devices with a Yellow Triangle and black Exclamation Mark through them do not have the Drivers installed so you'll need to install the required Drivers.
If the Optical Drives are showing in the BIOS correctly and you are using 98 I would be guessing on a new build that the Chip Set Drivers for the M'Board need installing and because of how old 98 is it doesn't support that Chip Set or even any sort of Default Drivers to get it part way working.
Anyway how did you get 98 onto this system?
Col
by zack247 Accepted solution
i am using windows 98. for all of the computers i build, i start with win98, just in case the computer hasn't been configured for winxp yet. then, when its all functional, i upgrade to winxp. i have tried five cd drives, and not a single one of them have worked. this is the same computer as mentioned in my other forum question. it is now working, the chip was burnt out, and it was a stand-up chip, so i couldnt figure out if it was burnt ut or not.i switched the chip, and it worked. but i am only running win98. is there any compatibility issues with something? here is a list of parts that are in it:
-asus P28-VE motherboard
-mitsumi cd rom drive model no. CRMC-FX320S
-LG 12X/8X/32X speed ide CD-RW drive product no. 06P5160 from IBM computer
-Intel Celeron
-256mb SDRAM
-hdd:Fujitsu model no. MPD3108AT
PCI Cards:
-Creative Labs sound card model no. CT4740
-Modem: barcode 9412504W
-3Com Etherlink XL 3C900-TPO internet card
PSU: Enermax 12v ATX PSU model no. EG365P-VE
by older mycroft Accepted solution
You still haven't explained how you managed to install W98 if the optical drive was not functional.
Also, why this incessant unending baseline where you start with W98 then upgrade?
Sorry but I've got to ask: are you upgrading to a Genuine Windows XP or have you got some sort of scammed pirate upgrade running here?
*I'd also like to know what you meant by "[i]a stand-up chip[/i]"?
Also, a 10.8GB HDD won't have much space left once you've installed 2.5GB+ of Windows XP.
Edit for *
by oh smeg Accepted solution
If the Optical Drive isn't working how did you install 98?
Probably more importantly ASUS doesn't list a P28-VE M'Board or anything at all under the P28 Family they do have a P2B-VM model which uses a Socket 370 M'Board is this the one that you are using here?
Col
by rob miners Accepted solution
On a clean drive, boot with your Upgrade CD.
It will boot to a Setup screen.
If a previous version of Windows is not on the hard drive, it will ask you to insert a CD from a qualifying version of Windows to verify before continuing the installation.
by zack247 Accepted solution
by ic-it Accepted solution
by zack247 Accepted solution
okay. the stand up chip im talking about is one of the celerons that plug into the brown slot. here is a pic: http://www.hwinfo.sk/images/CPU/Intel/IntelCeleron300A.jpg
it looks something like this. im not exactly sure, because i have never been curious enough to take off the heatsink.
and, i use a different computer to install win98.
no, i use a legit copy of windows xp
i start with win98, because if the computer has never run winxp before, then it tells me it has all of these problems with the os and all that. so i start with win98 just in case.
does that explain it all?
by older mycroft Accepted solution
by zack247 Accepted solution
i misread the motherboard. it says P2B-VE. not P28-VE.
but yes that is the one.
heres a pic of the inside of my computer. you will see the chip im talking about
http://www.mediafire.com/imageview.php?quickkey=tbymztgny5c&thumb=4
a pic of the motherboard:
http://www.gearxs.com/gearxs/images/p2b.jpg
i used a different computer to install win98.
by oh smeg Accepted solution
Intel won a court case over AMD which has caused AMD to develop it's own Sockets and no longer supply replacement CPU's to fit on Intel M'Boards.
If these systems have not previously run XP they may very well not be compatible with XP, M$ used to have a XP Compatibility Tester though I can not find it on the M$ site now but I may be looking in the wrong place.
Quite a lot of these Slot 1 M'Boards where not XP compatible because of the way that ASUS incorporated the Intel Chip Sets on their M'Boards so that may very well be the problem here.
If you have a XP compatibility Tester I would suggest running it on the System but if you don't your only option is attempting to load XP from a XP Install Disc and not from within Windows which doesn't work anyway.
Set the BIOS to boot off the Optical Drive and insert the Windows XP Install Disc and when prompted to [b]Press Any Key to Boot of CD[/b] press any key and follow the prompts.
If the system can not find a HDD you need to press the [b]F6 Key[/b] when the first blue screen appears and when prompted insert a Floppy with the Chip Set Driver copied to it's root.
Or you can make your own Slipstreamed Install Disc for XP by using a product like nLite available here
http://www.nliteos.com/download.html
Just be sure to read the directions for use here
http://www.nliteos.com/guides.html
Col
by zack247 Accepted solution
by zack247 Accepted solution
by breezer85 Accepted solution
1) You mentioned that you installed W98 from another machine, was this because the drives weren't being detected before the install?
2) Try different IDE cables/Slots
3) If your answer to Q1 is 'No' then I suggest you plug the HDD into the machine you used as install, delete the CD Drivers, Shutdown, Plug back into current machine and see what happens!
4) Why on earth you'd want to install W98 the upgrade to XP is beyond me, but everyone has their ways!
Good Luck!
by zack247 Accepted solution
by breezer85 Accepted solution
Just from reading your post, i may have established a solution. You say you installed Win98 and also the drives aren't showing up in the BIOS. Can you remember if you loaded MSCDEX.EXE onto this machine as this is necessary for the drives to be detected from BIOS onwards!
Let us know how you get on!
by oh smeg Accepted solution
The problem here is with Second Hand Parts that you are using it is possible that something has failed. Did it cross your mind that maybe the M'Board was the issue here?
The IDE Controller on the M'Board can and does fail which in most places renders the M'Board unusable.
Try this to see if it is the IDE Controller on the M'Board.
Disconnect the HDD and the Optical Drive Data Leads from the M'Board. Disconnect both Optical Drives and with another [b]Known Good[/b] one set to Master plug in a Data lead to the End Connector and then plug that into the M'Board where the HDD was plugged into.
Place a Boot Disc into the Optical Drive and start the system. If the Optical Drive now works power down and unplug that Optical Drive and plug the IDE Data Lead into the Master that is fitted tot he case. Power up again and insert a Boot Disc into the Optical Drive. If that works now power down and plug in the second Optical Drive and repeat the Process. If it still works power down and remove the Data Lead from the M'Board and replace it into it's original Socket and plug in the HDD where it originally was plugged in.
However if the Optical Drives do not work after they are both plugged into the same Data Lead power down and check the Jumpers on the Back of the Optical Drives. The one on the end of the cable needs to be set to master and the one connected to the Middle connector needs to be set to Slave. With these old M'Boards and Data Leads the CS Cable Select Option may not be supported so don't attempt to use it.
Also the 3 different Optical Drives that you have tried do you know if they actually work?
When you are reusing old equipment you need to test and retest everything so that when you strike a problem you have some idea what works and what doesn't. If you just throw bits together and hope for the best you often will be disappointed.
Here you could have a mess of failed Optical Drives or a Dead IDE Chanel on a M'Board or a Dead Data Lead. Without knowing what was tested as working I would guess that first the Data Lead should be replaced with a Known Good one and if that doesn't work then the M'Board.
Col
by zack247 Accepted solution
by zack247 Accepted solution
by zack247 Accepted solution
by breezer85 Accepted solution
by oh smeg Accepted solution
Different M'Board Makers chose to Incorporate the Same Chip Set in different ways. So you can have a range of M'Boards with the same Chip Sets that do different things. Naturally the more expensive ones use more of the features of the Chip Set where as the Cheaper Ones don't. [b]But they all have the same Chip Set.[/b]
This happens within the same Make let alone across different Makers.
Anyway since you have got it working by swapping to the correct File I would suggest that you stop installing on different Hardware and install directly tot he Hardware that you want to use the OS on. If you continue to do this you will stop getting problems with the Hardware Abstraction Layer and make your life considerably easier.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending