Discussion Locked

CD won't AutoRun

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a PC that won't AutoRun a CD when I
put the CD into the CDROM Drive. I can take
the CD to another PC and it Autoruns just fine. If I use another (2 others in fact)CD
it Autoruns fine, starts the install and all.
I have to cancel the install. Put another CD in and it Autoruns just fine also. I tried
cleaning the "NonAutorun" Cd. Still won't Autorun. Plus, what I get when I put the "bad" CD in, is the CDPlayer in the task bar. So, the CDROM drive thinks it has an audio CD in it. LikeI said, if I take the "Bad" cd to another PC it works great.

Gary Turner

11 replies

by jschultz

If it is Windows NT computer, autorun may have been disabled. Look for a REG_DWORD value named Autorun in HKLM\SYSTEM\CurrentControlSet\Services\Cdrom\. If it is there and the value is 0, change the value to 1 and that should fix your problems. Hope this helps.

by big ray

If the OS is Win9X there is a checkbox under the properties of the CD-ROM in the device manager screen. Make sure that the autorun checkbox is checked. As long as you are in there, remove the offending drive and then either restart the computer orrefresh and let the computer redetect the CD-ROM Drive. This should clear up the problem with the computer mistaking the CD as an audio CD.

by pcpalct

Not all CDs autorun. None the less, make sure you check mark the Autorun button on the configuration screen in the Control Panel. If this does not work, and you are on NT or 2000 (Windows)or Linux\Unix these systems do not always support autoruns.

by 1stladytech

if this is a burnt cd (non-commercial) it may be that the session was closed, but not the cd. It may work on another system due to burn software running, or your cd just may not be able to handle the burnt rom. If you have an older cd, try to upgrade to a current generation cd. I have seen both situations, but generally only with CDR or CDRW media.
LOL
Vickie

by cyberdave

If it is a program CD you have already installed once, TOTALLY remove the program from Windows and then give it a try.

Good Luck!

This discussion is closed to new replies.