Question Locked

CF-28 and windows 98

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently installed Windows 98 on my CF-28 (cf-28s3qgbdm) and can't seem to get it to open in full screen. it only uses 1/2 of the screen in the center. i installed the drivers from panasonic but nothing changed. any ideas?

3 replies

by older mycroft

Some of the older systems cannot interpolate to stretch the image.

by captbilly1eye

Aren't there F keys on that model to adjust the display? ...been quite a while since I've looked at one.

As OldMycroft, asked about... right click on an empty spot on the Desktop, select Properties and click on the Settings tab... what is the screen size/resolution set to? It should be at 800x600 most likely.

If you are interested, here is where you can purchase a user manual for $20.:
http://tinyurl.com/22taxf

In addition, here's where you can download a full service manual as a .PDF:
http://amd751.ru/files/cf-28techmanual.pdf

This discussion is closed to new replies.