Discussion Locked

Change between Domain/Workgroup login

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hopefully an easy question. I have a Win2k laptop that needs to login to an NT Domain at work, and on to a Peer Workgroup when I'm at home. Right now I have to change my Network ID and rejoin the domain/workgroup and reboot everytime I connect to either my work or home networks. There must be an easier way. What is it?

7 replies

by infosecmn

I have had great success with a very reasonably priced tool called Netswitcher. I have remote users that have home networks and need to also connect when they come into the office. The tool allows mutliple network settings. One thing though, remember to switch the setting to the next location just before you power off from your current location or you will have to reboot after applying the new setting. Is is available at www.netswitcher.com Hope this helps.

by mphoffar

Netswitcher isn't a bad idea if you have specific addresses on each network, but if both of your setups are DHCP with everything being assigned, then all you should have to do is setup a local login on the machine through users and groups. At that point, you can still log into the domain like you always have, but when you go home, you would just change your domain name to the machien name. It should be identified in the domain list as something with a (This computer) by it.

Mark

by mr. origami

Don't understand. When I go home, how would I change the domain name? Through Network properties (requiring a reboot - which is what I do now). Or physically just typing it in to the domain field of the logon box (does it even let you type something in, or aren't you restricted to the choices in the drop-down menu)?

by mphoffar

The pull down should contain your machine name in there in addition to the domain you log into. You wouldn't be able to type anything in there. I guess imagine it as, instead setting some computer on the domain to authenticate your username and password, you're telling it that you want the local station (your laptop) to authenticate your password. However, the only users it can authenticate is what it contains in it's user manager. Generally, this is only the administrator account, so you will have to go into the control panel and then users and groups to add in a new user on the local machine.

Ya know though, and I didn't mention this before...really the easiest way is to set your profile to cache all of it'ssettings and the login at home like you would at the office. If you did that, then you'd still use your work password at home to get onto the desktop. Granted, it's a bit slower to log onto the desktop, but it gets there.

Mark

by mr. origami

I thought they had to be part of the same workgroup to share files. If I logon to my local machine as opposed to the domain - the computer's network membership still belongs to the work domain, not my home workgroup. So - I'd have my desktop part of a workgroup and the laptop part of a domain but logged on locally. They don't have to have the same network membership?

This discussion is closed to new replies.