Discussion Locked

Change W2K Pro PC name on NT4 Domain

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
The computer name on the network default to FJLLGJRV after installing W2K pro on an HP vectra. I am trying to make the PC name to something more meaningful however the Computer does not show with the new name under Network Places. It always shows the Netbios default name. I have defined a WINS server and also the DNS, TCPIP settings on the Network Properties icon are defined.

3 replies

by spunkmnky

Before doing this make sure you have administrative rights to the local box when it's disconnected from the network. Go to system properties, network identification tab, properties, and make the computer part of a workgroup (doesn't have to exist, trust me) you should be able to change the computer name at this point too. Shut down the computer. Go to the NT4 domain and delete the computer name in the server manager, hit F5 to refresh and make sure the name has been deleted. Boot the 2K machine and log on locally. System properties, network identification, properties, in the domain box type the domain, a box will appear asking you for a user and password with the rights to add the computer to the NT4 domain. A confirmation box shouldappear and you're now in the domain again with a new computer name. For some reason NT4 requires you to completely exit out of domain login mode before you can switch to a new domain. This one had me pulling my hair out a couple months back and then a friend of mine casually pointed it out, how annoying :)

Later

by fleon

Thanks, THis worked out allright. The only thing is we do not have access to the NT domain therefore we are not able to delete PCs. However after a period of time the new name appeared on the PC as needed.

This discussion is closed to new replies.