Discussion Locked

Changing computer names

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can you change the name of a computer in a NT 4.0 domain, and not lose the individuals profile? I need to change about 5 computer names, but don't want the users to have any problems. Don't want them to have so re-setup their profiles. Any help would be appreciated. OS is NT 4.0 Workstation all around and 4.0 Servers (2-PDC and BDC only) Thanks again, Roger.

11 replies

by chrisaaaaaa23

You will not lose the user profiles... If your users have roaming profiles, then no problem as the profile is stored on the server, and if they have local profiles, then they will stay the same on each individual PC.

by don christner

Remember that the computers will have to rejoin the domain under their new name. If you plan to physically be at the computer to change it's name, just log in with admin rights and it will automatically rejoin the domain. Otherwise, from the server,goto server manager and ad the new computer name. If the computers have any shares on them locally, you will have to redo the shares so others can connect to them.

Don

by curlergirl

If you change computer names, you have to remove the computer from the domain, change the name and then rejoin the domain. This WILL cause users who are logging on to the domain to get new profiles. What you can do if you are not using roaming profiles is to copy each user's profile to one of your servers first, then do the computer name change, then log on as the user, then log off and log on as Administrator and copy the profile from the server back to the local workstation. If you don't know how to do this, email me (synergy@synoffsys.com) and I'd be glad to give you exact steps. Hope this helps!

by mark.ward

user profiles are not affected by a name change.

you can change the name of the workstation in two ways.

first way

1. choose your 5 new names and create 5 new workstation computer account using server manager and sync the domain.

2. go to the first machine and go to network properies. in the computer name field type the new name for the machine. you will be warned about changing a computern name before changing its name on the netwotk may leave this machine unable to access resources. you have already done this in step 1. reboot workstation. when the machine comes up it will have a new name.

second way.

1 visit each machine and go to network properties. take the machine out of the domain and into a workgroup. reboot.

2. when machine has rebooted log back in go back to network properties and now change the machine name. reboot.

3. when machine has rebooted log back in again go back to network properties and take machine from the workgroup and into the domain it was in before. you will need to supply a username and password that has permission to created computer accounts in this domain (usually administrator) you will receive the "welcome to XXXXXXX domain" message box. reboot.

your users will not have to recreate their profiles

This discussion is closed to new replies.