Discussion Locked

Changing IRQ setting in win2K

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How can I change the IRQ of a device in win2K? The device is shearing and I believe this is what's causing the problems we are seeing during testing of a new system. In device manager the option is grayed out.

7 replies

by rivertf

It is a Plug and Play device? If it, is try the disk/cd utilities to see if you can change the device?s IRQ by rom.
If not, old jumper style still works sometimes.
Finally go to systems information and see if:
one if exists any conflicts between your card and something else.
Two if exists available IRQ.
Last, Kind of amateur to ask you this but better safe then sorry, do you have permissions to change proprieties on the device?
Hope it helps.

by michael.watson

Thanks But we found out that the systems IRQ settings are automatic and is set by the Bios and will not be changed easily.

by ciscofred

How you tried disable plug in prey in your bios? I have never tested that out so i can't tell you if that will work for you or not. You will have to try it. Good Luck!
P.S. Let us know if that worked?

by paul.a.wisniewski

not sure what system your using but most name brands have options to charge irq's in the bios or computer setup , if that doesn't work , remove the card and place it in a different slot good luck

This discussion is closed to new replies.