Hardware

Ask something
Discussion Locked

Changing RAID 5 to RAID 10

0 helpful
1 reply

by utken

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi. I have a new ML350 server with six 36GB SCSI drives and a hardware RAID controller installed. It has a RAID 5 setup. Is there a way to change it to RAID 1+0? The server runs on WIn2003 Server and has nothing else installed.
Thanks for any help.

1 reply

by pierrejamme

Personnaly I would want a server with anything but Raid 5. is the reason for the change is that you need more space?
Not familiar with ML350, but you will have to enter the controller setup on boot, break the raid 5 and rebuild as 1. Then re-install server 2003.

This discussion is closed to new replies.