Discussion Locked

cisco pix 506

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

we are using cisco pix 506 for firewall and once awhile the unit shut down itself. so when it turn the unit off and turn it back on again then it is ok. Can anyone tell me what cause this

thanks

1 reply

by ebob

It could be a faulty power supply in the PIX, or it could be the power source. I would check to make sure that the UPS into which the PIX is connected is functioning correctly, and that there is no way for anybody to accidently bump either the powerwsitch on the PIX or on the power bar.

It is remotely possible that your config is corrupted. This has been known to happen when, for example, your access lists are too big for the available memory. It would be a very slim chance that the resultant corrupt config could cause your PC to reboot.

This discussion is closed to new replies.