Discussion Locked

Citrix Client Printer Mapping

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Here's the scenario:
Server:
NT 4.0 TSE w/ SP2 running
Citrix Metaframe 1.8 publishing
Abra (payroll software) and
Made2Manage (management software)
Connected through ISDN to remote client
Client:
Win95 (don't know if A, B or C)
HP Deskjet 693c (set as default)
Citrix Program Neighborhood
When using either published application Citrix will not map the remote client's printer for use with the applications. Citrix is configured to map client printers and inherit user config on this option is deselected. In the published applications' print setup the client's printer does not appear as a choice. Any suggestions? Does the remote client's printer need to be shared? Thanks, Zak

9 replies

by spydergst1

If the client has used a different printer in the past you may have to remove that printer then have them login in agian. The new printer will autocreate. This may happen everytime their default printer changes.

If the first solution doesn't worktry this. The printer driver needs to match exactly for both OS's. ie. NT OS; HP 5si mx, 95 OS; HP 5si ps. Both may be the same driver (which in this case they are not but this is for the sake of argument). but they have different driver names for each os. they need to match exactly so you will have to edit a file on the Citrix side to reflect the difference, ie. HP 5si mx = HP 5si ps

I can't remember the name of the file but you can search for the answer you seek at

http://206.103.132.14/icaforum.nsf/($All)

I have other solutions to add but I'm short on time. If none of these work let me know I will respond with more ideas

by Former member

The question was auto-closed by TechRepublic

by computerdude

In order for Citrix to automap printers the driver name has to be exactly the same on the server and the client. Try using the HP DJ690 driver that comes on the TS cd. I have used this with success for most DeskJets. Also read some KB articles on Citrix's site regarding printing.

Dave

by Former member

The question was auto-closed by TechRepublic

by garetjax

Zakk,

In order for Citrix to automap your DJ693c, you will need to add the exact print driver name to the Citrix printer mapping file (wtsuprn.inf). Try mapping the DJ693 to a DJ500 for testing purposes.

The automapping process uses the wtsuprn.inf file to identify the local client's print driver and map it to a driver install on the TSE server.

There are good references on the Citrix support site (both Knowledge Base and user-to-user forum)

Good luck.

by Former member

The question was auto-closed by TechRepublic

by scottaw

Are you sure you are running SP2 not NT40?
If this is so, up grade to SP6 and most of the problems will go away.

by Former member

The question was auto-closed by TechRepublic

by Former member

This question was auto closed due to inactivity

This discussion is closed to new replies.