Discussion Locked

Combo card won't logon network thru RAS

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Installed 10/100 Etherjet Mini PCI 56k in Thinkpad X20, running latest driver(s).
LAN logon ok via Ethernet, however, when remote LAN logon is required, only way I've been able to make it work is to remove tcp/ip from NIC in NN -
Works if logon LAN via ethernet, log off user (but don't restart), esc past logon screen -
Have run into this before, never found solution beyond removed tcp/ip when need DUN LAN logon, add tcp/ip back when need local LAN logon.
Thanks for any suggestions

3 replies

by curlergirl

There really isn't any solution - this is a well-known problem with Win9x and NT systems. But another possible workaround is to create two different hardware profiles - one with the TCP/IP bound only to the NIC and the other with it bound only to the modem. Then, you can choose at logon which hardware profile to use. Or, if it's an NT system, your two hardware profiles can be with the binding for the NIC first in the binding order on one profile and the binding for the modem first in the other profile. That might work, too. Hope this helps!

This discussion is closed to new replies.