Discussion Locked

Computer is in safe mode; Message is:

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

While Initializing device IOS:
Error: An I/O subsystem driver failed to load.
Either a file in the ./iossubsys subdirectory is corrupt or the system is low on memory.

5 replies

by dmiles

This problem may occur when all memory below 1mb is allocated prior to initialization of Ios.vxd
Start the computer in Safe Mode and then run sysedit so to edit your system.ini file
In panel you will find heading [vcache]
under this you enter: maxfilecache=6144
Save it and reboot

by mariahchrista

A VERY AWESOME ANSWER! AN EASY STEP BY STEP PROCESS (SINCE I'M NOT EVEN CLOSE TO A COMPUTER WHIZ!). THE COMPUTER WORKS PERFECT NOW! THANK YOU!

by romancesar

http://support.microsoft.com/support/kb/articles/q225/4/97.asp

RESOLUTION
This problem can be worked around by adjusting the maximum cache size allocated by Vcache.vxd. Vcache.vxd allocates an initial cache size that is no larger than 9MB. Setting the maximum cache size to less than 9MB also reduces the initial cache size, freeing up memory below 16MB and allowing Windows 95 to boot properly.

The maximum cache size is set by adding a "maxfilecache" line to the vcache section of System.ini. The following example shows what an entry in System.ini would look like to set the maximum cache size to 6MB:

[vcache]
maxfilecache=6144

by mariahchrista

THIS IS AN AWESOME ANSWER AND IT HELPED. MY COMPUTER WORKS FINE NOW! I'M JUST SOMEWHAT COMPUTER ILLITERATE. THE OTHER ANSWER TOLD ME TO RUN SYSEDIT. I WOULDN'T HAVE KNOWN HOW TO FIND THE SYSTEM.INI. I KNOW NOW THOUGH! THANKS.

This discussion is closed to new replies.